Curved Laminate Reception Desk
An L-shaped reception desk with a pill-shaped slotted front and a full half-round end, built entirely in two high-pressure laminates.

- Scope
- L-shaped reception desk
- Size
- 144" × 96"
- Materials
- Two HPL finishes, concealed brackets
- Deliverables
- Shop drawings, 3D views, Microvellum model
- Software
- AutoCAD + Microvellum
The brief
A front-office reception desk, 12 feet along the front with an 8-foot return. The public face is a pill-shaped panel with four vertical slot recesses; the low section runs out to a semicircular end. Behind it are a 25-inch work counter on concealed brackets, two drawer pedestals and removable access panels in the knee space.
The challenge
Curves are easy in solid surface and unforgiving in laminate. This desk has a 12-inch-radius front with a curved cap, a full half-round end, an overlapping rounded panel and 3-inch radii at each slot, with two laminates meeting on curved and overlapping planes. The design documents added their own problem: the architect had issued two sets carrying the same date, and they did not agree. A laminate color then changed while the drawings were in progress.
How we solved it
We redrew the desk against the permit set and said so on the submittal, so there was one reference for everyone. The curved end is built from ribbed framing shown in plan section, with arc lengths noted for laying up the laminate. The counters cantilever on 22-inch concealed brackets fixed to studs inside the die wall, and access panels sit on 1/8-inch reveals so wiring stays reachable. Six sections, four elevations and a wireframe view showing drawer slides leave very little for the shop floor to interpret.
The result
The first submittal went out two days ahead of the agreed date. It came back with minor comments, including a change to the low counter height, and was approved on the next round. The Microvellum model followed, and the fabricator confirmed it matched the approved drawings.